Description
Oil filters should always be used in conjunction with any oil control system. The filter ensures refrigeration oil is clean of any foreign matter that may obstruct float valves in oil regulators and oil separators. The filters are designed to be a low-pressure drop filter, while remaining effective at removing particulate matter.
Basic specifications
Advantages
Applications
Oil filters should always be used in conjunction with any oil control system. The filter ensures refrigeration oil is clean of any foreign matter that may obstruct float valves in oil regulators and oil separators. The filters are designed to be a low-pressure drop filter, while remaining effective at removing particulate matter.
Basic specifications
- The FH3-01 and FH3-02 models are designed using XH-9 desiccant for removal of moisture in POE oils and contaminants
- If a shut-off valve is required, a 3/8" (0,95cm) ODS Rotolock valve with gasket (requires 2 valves) is recommended
- 4 micron retention
- 99.5% efficient at removing 4 micron particles and larger
- 330 square inches (838,2cm2) of filtering surface area
- 8 cubic inches (20,32cm3) of XH-9 desiccant (models FH3-01 and FH3-02 only)
- Suitable for halocarbon refrigerants and all oil types
- Replace at 15 psig pressure drop
- 3/8" (0,95cm) flare and 3/4" (1,91cm) -16 connections offered (use swivel valve for 3/4" (1,91cm -16 connection)
- 675 psig maximum working pressure
Advantages
- Welded design for higher strength
- Nitrogen tested for cleanliness
- Good for all oil types
- Powder paint finish
Applications
- Commercial refrigeration
- Industrial refrigeration
MORE INFORMATION
Related products
RELATED COMPANY
Sign up to our Newsletter
Fill in the details below
