Advansor - Cubig

Cubig

A flexible hybrid with the perfect balance between power and value.

Copper piping gives the same features and reliability of the steel products in a lighter format – which makes it easier for the installer to change parts in the rack.

The Advansor Cubig has

Standard Equipment
Patented Internal Heat Exchanger in Receiver
Hot Gas Dump
Liquid Injection Filter Drier
CO₂ Low Level Switch
Discharge Manifold Connected to Safety Valves
Frequency Inverter on MT1 and IT1.

Controllers Available
Danfoss
Wurm
Carel
RDM
Eckelmann

Standard Design Pressures
High Pressure: 120 bar
Receiver Pressure: 80 bar
MT Suction Pressure: 52 bar
LT Suction Pressure: 30 bar

Options Available

Advanced Heat Recovery
Gas Cooler Bypass
Heat Pump Evaporator Function
Parallel Compression
Ejector Technology
Air conditioning
Enclosure for Low Noise and Outdoor Installation
Receiver Emergency Cooler
60 Bar Suction Side
Double Safety Valves on Switchover Valves
Liquid Subcooler
Chiller Module
Double High Pressure- and Gas Bypass Valves
Back-up Controllers
CO₂ Liquid Level Measurement
Energy Meter
Insulated Hot Surfaces

The Advansor Cubig is ISO 9001:2015 certified

Extensive factory tests to ensure fast commission on both pressure and electrical installations

Documentation and manuals that meet legal requirements.

Frame size	3×3 / 4×4
Max No. of MT (IT) Compressors	3 (max 1 IT ) / 4 (MAX 1 IT)
Max No. of LT Compressors	3 / 4
Max Capacity MT [kW]*	170 / 170 *All capacities are calculated at -8°C MT, -30°C LT and 35°C out of the gas cooler
Max Capacity LT [kW]*	115 / 115 *All capacities are calculated at -8°C MT, -30°C LT and 35°C out of the gas cooler
Receiver Volume [L]	130/170 for both
Height [mm]	2,200 for both
Length [mm] (excl. Switchboard)	3,000 / 3,500
Width [mm]	800 for both
Approx. Weight [kg]	2,000 / 2,500